Nibe Fighter 1245
– Download Brochure
for Nibe Heat Pumps (2.8 Mb pdf
file)
Fighter 1245 is a complete heat pump unit for heating single family houses.
This type of unit is available in seven different variants with output
levels from 5 to 12 kW.
The efficiency of the FIGHTER 1245 is high, thanks to
a highly efficient compressor in a well-dimensioned refrigerant circuit.
This results in the considerable coefficient of performance (COP) of 54.6 at 0 °C incoming
cooling medium temperature and 35 °C outgoing heating medium temperature
(including circulation pumps).
The FIGHTER 1245 is designed in such a manner, that the compressor and the
refrigerant unit is housed in a separate enclosure for easier servicing. As
a result the compressor features double sound-proofing, resulting in very
low noise levels. Both the circulation pumps are built-in and the heat
source circuit can be connected to the left or right-hand side of the unit.
Dirt filters are also included in the contents of delivery.
The FIGHTER 1245 is fitted with a 180-litre enamelled, double-jacket hot
water heater, which is insulated with polyurethane foam to minimise heat
loss. The built-in three-stage 9 kW cartridge heater can be switched on
automatically if needed.
 |
The unit can be connected to a low-temperature distribution system such as
radiators, convectors or under-floor heating.
The FIGHTER 1245 is fitted with a microprocessor to ensure optimal and safe
operation. Clear information about status, running time and all essential
temperatures in the heat pump are presented on a two-line LCD display. This
means that external plant thermometers are not necessary. |
The new FIGHTER 1245 has been equipped with a new control panel which offers
new functions.
Benefits at a glance:
• Larger control panel with clear symbols
• The easily understandable control simplifies the control and operation of
the heat pump
• Double heat curves
• Programmable for climate and cooling control
• Clock
• Timer for temperature control
• Timer for hot water function
• Prepared for GSM- and Internet-integration
• Alarm logbook
• Soft start relays
• Prepared for the configuration of four different installation systems
• Display of the refrigerant temperature
